Search Results for airside safelifters

7.5m x 3m x 25mm Airside Road/Pit Cover Plate – Steel C/W Bevelled Edge and SALLY Airside

Typical applications: Aeroplane logo denotes ‘fit for airside works’ Unique serial number clearly marked for traceability Can be used on streets and highways Primarily used where top grade anti-skid with non friable,anti glare coating is required Bevelled/chamfered edges on all four sides to avoid them being a trip hazard To traverse excavations up to 1700 mm wide, where pedestrian and/or cars will cross To cover trench up to 1200 mm wide for…

3m x 1.5m x 25mm Airside Road/Crossing Plates – Steel C/W Bevelled Edge and SALLY

Typical applications: Aeroplane logo denotes ‘fit for airside works’ Unique serial number clearly marked for traceability Can be used on streets and highways Primarily used where top grade anti-skid with non friable,anti glare coating is required Bevelled/chamfered edges on all four sides to avoid them being a trip hazard To cross excavations up to 1,600 mm wide for masses such as highway traffic Ideal for doing extended runs in carriageways…

6m x 3m x 25mm Airside Road/Pit Cover Plate – Steel C/W Bevelled Edge and SALLY

Typical applications: Aeroplane logo denotes ‘fit for airside works’ Unique serial number clearly marked for traceability Can be used on streets and highways in zones with minimal camber, but more suitable for continuously flat zones often larger industrial/airport/dockside and airport environments. Primarily used where top grade anti-skid with non friable,anti glare coating is required Bevelled/chamfered edges on all four sides to avoid them…

4m x 2m x 25mm Airside Road/Crossing Plates – Steel C/W Bevelled Edge and SALLY

Typical applications: Aeroplane logo denotes ‘fit for airside works’ Unique serial number clearly marked for traceability Can be used on streets and highways Primarily used where top grade anti-skid with non friable,anti glare coating is required Bevelled/chamfered edges on all four sides to avoid them being a trip hazard To bridge excavations up to 1700 mm wide, where pedestrian and/or cars will cross To cross a trench up to 1200 mm wide for…

2.0m x 2.0m x 25mm Airside Road/Pit Cover Plate – Steel C/W Bevelled Edge and SALLY

Typical applications: Aeroplane logo denotes ‘fit for airside works’ Unique serial number clearly marked for traceability Can be used on streets and highways Primarily used where top grade anti-skid with non friable,anti glare coating is required Bevelled/chamfered edges on all four sides to avoid them being a trip hazard To traverse excavations up to 1700 mm wide, where pedestrian and/or cars will cross To cover trench up to 1200 mm wide for…

Airside – London Heathrow

Using: 3m x 1.5m x 25mm Airside – Steel C/W Bevelled Edge and SALLY Having supplied plates for ‘airside’ projects in the past we were aware of some of the problems faced by these challenging sites. Normal friction treatments were unsuitable for various reasons including; Should the resin-grit become unadhered due impact, bending of plates or the scraping of excavators in areas where aircraft may operate it could become extremely hazardous if…

Sally Safelifters

We are prevalent in technology relating to road plates, their handling and their uses. Our researchers are always looking for the best solutions. That is how we maintain our status as ‘state of the art’. Over the years we’ve tried different ways of suspending and lifting plates of all sizes on site. Up until the SALLY, every one has always had their draw backs. The previous industry standard method of chain holes in the corners is time…

Airside Safelift Anti-Skid (BAA) Road/Crossing Plates

We are the originators and pre-eminent manufacturers worldwide combining all of the following technologies to create the unique Airside-Safelift range.

Industry firsts

SALLY. The SALLY (Swivel Action Lock and Lift Yolk) is without doubt one of the biggest contributions to lifting and handling plates and similar items safely and securely. We are proud to have been the very first to have launched it into the U.K market back in 2012 and we remain the number 1 choice for hire and sales to date. SALLY Weekly Off Hire/Collection Reporting – Equipment tracking We realised from the very beginning that one of…

Working with U.K Airports – Protecting new concrete

Using: 6m x 3m x 25mm AIR SIDE – Steel C/W Bevelled Edge and SALLY Even those that have never set foot on a runway or airside apron will have looked out a plane window in wonder at the massive patchwork quilt of concrete panels that make up modern ground airport infrastructure. It is of course no accident that these areas are gridded out and uniform in size. When constructing them, each panel can be calculated to take a set number of standard…

Page 1 of 212