Search Results for anti vandal split officestores 20 ft 6 0m

20ft Anti-vandal split Office/Store

Where office working space and discreet storage is required in a tough and compact unit, there versatile split office stores could be the answer Windows, electrics, lighting and heating High security doors Suitable for stacking Furniture offered subject to availability Personnel door and specific cargo/store door. ISO style corner irons for safe, ground level rigging for lifting External dimensions: L: 20 feet (6.06m) W: 8 feet (2.44m) H: 8…

2.5m x 1.25m x 20mm (8ft x 4ft x 3/4 inch) Anti Skid – Steel Road Plate

Typical applications For use on streets and highways and the recommended standard thickness for construction sites. Assuming stable ground conditions and when positioned with the long side of the plate bridging the void, to traverse excavations up to 800 mm wide for highway traffic Assuming stable ground conditions and when positioned with the long side of the plate bridging the void, to cover trench up to 400 mm wide for trucks, medium…

2.5m x 1.25m x 25mm (8ft x 4ft x 1 inch) Anti Skid – Steel Road Plate

Typical applications: For use on streets and highways. To traverse excavations up to 1200 mm wide for highway traffic Ideal to support collapsed manhole covers etc To cover trench up to 750 mm wide for trucks, heavy construction plant, cranes and forklifts Not suitable for traversing with steel tracked vehicles, as their tracks will cause damage to the anti-skid surface if applied directly. (See our bare steel range). As with all…

20ft Anti-vandal Canteen

If there is only room for 1 x 20 foot accommodation unit, if you can make sure you get one with hot water and sink facilities (site canteen) Windows, electrics, lighting and heating Simply connect to on site water and drain for hot water and sink facilities High security doors Suitable for stacking Furniture offered subject to availability ISO style corner irons for safe, ground level rigging for lifting External dimensions: L: 20 feet (6.06m)…

20ft Anti-vandal office

A decent amount of working space, in a tough and compact container Windows, electrics, lighting and heating High security doors Suitable for stacking Furniture offered subject to availability ISO style corner irons for safe, ground level rigging for lifting External dimensions: L: 20 feet (6.06m) W: 8 feet (2.44m) H: 8 feet 6 inches (2.59m) Mass: apx 2,900 kgs Mechanical handling: ISO style corners for craning or suitable forklift

Secure Site Store – 20ft x 8ft x 9ft 6in High Cube

Sometimes referred to as ‘Hi Cube’ or High Cubic Capacity due to their increased volume for the same sized floor plan. At a foot or more taller inside than a standard 20 they are an excellent choice for contractors working roadside that need to get their 3 tonne excavator and dumper in and secured. Mortice lock or padlock versions available Suitable for installation requiring staking and integrating ISO style corner irons for safe, ground…

2.0m x 2.0m x 25mm Anti-skid Road Plate– Steel C/W Bevelled Edge and SALLY

Typical applications: Unique serial number clearly marked for traceability Can be used on streets and highways Bevelled/chamfered edges on all four sides to avoid them being a trip hazard To traverse excavations up to 1700 mm wide, where pedestrian and/or cars will cross To cover trench up to 1200 mm wide for trucks, heavy construction plant, cranes and forklifts Ideal for stabilising collapsed man hole areas To make safe larger open…

2.5m x 1.25m x 12mm (8ft x 4ft x 1/2 inch) Anti Skid – Steel Road Plate

For use on streets and highways Assuming stable ground conditions and when positioned with the long side of the plate bridging the void, to cover trench up to 400 mm wide for highway traffic The most widely used roadplate with utilities operations Not suitable for traversing with steel tracked vehicles, as the tracks will cause damage to the anti-skid surface if applied directly. (See our bare steel range). As with all roadplates/crossing…

2.0m x 2.0m x 25mm Airside Road/Pit Cover Plate – Steel C/W Bevelled Edge and SALLY

Typical applications: Aeroplane logo denotes ‘fit for airside works’ Unique serial number clearly marked for traceability Can be used on streets and highways Primarily used where top grade anti-skid with non friable,anti glare coating is required Bevelled/chamfered edges on all four sides to avoid them being a trip hazard To traverse excavations up to 1700 mm wide, where pedestrian and/or cars will cross To cover trench up to 1200 mm wide for…

2.5m x 1.25m x 20mm (8ft x 4ft x 3/4 inch) – Steel Crossing/Pit Cover Plate

Typical applications To cover trench up to 800 mm wide for highway traffic loadings and similar masses To bridge trench or void up to 400 mm wide for lorries, medium construction plant and medium forklifts Ideal for skating and/or rolling heavier loads across terrain that is hard but not flat and smooth. Suitable for traversing with steel tracked machinery Also used for covering hardened areas (block pave, tarmac and non reinforced concrete)…

Page 1 of 1512345...10...Last »