Search Results for case studies

Ground Mat Minis – 1.5 m x 1.0 m x 20 HDPE

Typical applications: These are the smaller version of the standard 3.0 x 1.0 m GPRM panels. Their size makes them ideal for pallet-line/over night carriage transport options, They will also fit in the boot of most estate cars or SUV’s Depending on the underlying ground conditions, they will support a 45 tonne lorry Made from recycled plastic material and is therefore recyclable again. Superb for covering and protecting tree roots, potentially…

Walkovers

Heavy duty rubber Walkovers are ideal for foot traffic over grass and unmade ground. Panel dimensions 1,200 x 700 Textured surface mean that they stay where they are put, even on slopes and embankments A ‘clean feet’ solution for parties, events and sensitive job sites. Our installation service is available if required. They have a link up function on all 4 sides so can be formed in pads of any dimension. Approved for use by National Grid and…

Knowledge Centre

Application Matrices – find the roadplate you need Questions and Answers – answers to common questions Applications matrices – Roadplates These tools help you find the right road plate for the job, and tell you what options are available. For more help, just give us a bell! Key: Questions and Answers What is non mechanical plant? Plant such as such excavators, dumpers, saws and generators are by their nature, mechanically…

6m x 3m x 25mm – Steel Crossing/Pit Cover Plate C/W SALLY

Typical applications To traverse excavations up to 1700 mm wide for light/medium traffic and similar masses To cover trench up to 1,400 mm wide for trucks, heavy construction plant, cranes and forklifts Good for skating and rolling heavier loads across problematic terrain Suitable for traversing with steel tracked machinery Of an adequate thickness to form outrigger/stabiliser pads for plant. Also used for covering areas (block paved, tarmac…

7.5m x 3m x 25mm – Steel Crossing/Pit Cover Plate C/W SALLY

Typical applications: To traverse excavations up to 1,700 mm wide for highway traffic and similar masses To cover trench up to 1,400 mm wide for trucks, heavy construction plant, cranes and forklifts Good for skating or rolling heavier loads across uneven areas Suitable for traversing with steel tracked machinery Of an adequate thickness to form outrigger/stabiliser pads for cranes and plant. Also used for covering areas (block paving, tarmac…

2.4m x 2.1m x 40mm C/W Sally Lifter (Bridging Plates)

Typical applications: Solid base for temporary structures Getting very heavy load combinations across excavations or culverts Used as outrigger pads to spread heavy crane/piling rig/concrete pump outrigger loads To make safe larger open excavations such as inspection pits, bell chambers or utilities service junctions Suitable for traversing with tracked vehicles, As with all roadplates/crossing plates, the loadings for whatever passes over…

Heavy duty – SERIES 38 – Steel C/W Bevelled Edge and SALLY

Typical applications: In 38 mm thickness of S355 equivalent steel, this is one of the thickest and highest performing crossing plate ranges available. Suitable for larger industrial/airport/dockside environments. Bevelled/chamfered edges on 2 sides, and square edged on the other so that the remaining edges can give a clear and clean abutted joint that enables the formation of a continuous runway 3.50 m wide and any combination of lengths. To…

2.4m x 2.1m x 40mm C/W Sally Lifter (Bridging Plates)

Typical applications: Massive base for temporary structures Bridging very heavy load combinations across sensitive areas Used as pads to bear heavy crane/piling rig/concrete pump jack loads To make safe open excavations such as inspection chambers, bell pits or utilities junctions Load bearing capacities of many hundreds of tonnes subject to application. Suitable for passing over with tracked vehicles, As with all roadplates/crossing plates,…

Heavy duty – SERIES 38 – Steel C/W Bevelled Edge and SALLY

Typical applications: In 38 mm thickness of S355 equivalent steel, this is the heaviest and highest performing crossing plate ranges available. Can be deployed on streets and highways in extremis, but more suitable for larger industrial/airport/dockside environments. Bevelled/chamfered edges on 2 sides, and square edged on the other so that the remaining edges can give a clear and clean abutted joint that enables the formation of a continuous…

FE45 – 3.6 x 3.0 x 45 mm Steel Crossing/Pit Cover Plate C/W SALLY

Typical applications: Massive base for temporary structures Bridging very heavy load combinations across sensitive areas Chamfered edges and ANKER bolt counter-bores Specified to carry 44 t GVW across 2.50m x 2.50m square and unsupported voids To make safe open excavations such as inspection chambers, bell pits or utilities junctions Suitable for crossing with tracked vehicles, Can be bolted down with ANKERBOLTS to improve security and load…