Search Results for standardoverlapping trench sheets

Standard/Overlapping Trench Sheets

Steel trench sheets are an efficient ground support and shoring solution for trenches, manholes and associated applications encountered in groundworks, utility, construction civil engineering projects. Standard/Overlapping Trench Sheets (Mass apx 11 kgs per linear metre) 1.0 m long 1.5 m long 2.0 m long 2.5 m long 3.0 m long 3.5 m long 4.0 m long 4.5 m long 5.0 m long 5.5 m long 6.0 m long * Call us for longer versions if required *…

Trench Struts (Small foot)

Trench struts are commonly used to shore excavations under compression. Their tubular steel construction with a square edged thread and variable position pin locking system that means that can be used at variable lengths within their working stroke. The clawed head makes them particularly suitable for work in a horizontal axis and in conjunction with timber bearers. Size Closed (Metric) Open (Metric) Closed (Imperial) 0 0.32 m. 0.47 m 1 ft 0…

Wooden Pole Ladders

…Durable and sturdy wooden pole ladders available in a variety of lengths, all in stock. Their resistance to deformation or complete failure in the event of a trench collapse and their non metallic (non-conductive) nature still make them the favourite choice for excavation access. Specification sheet…

Knowledge Centre

Application Matrices – find the roadplate you need Questions and Answers – answers to common questions Applications matrices – Roadplates These tools help you find the right road plate for the job, and tell you what options are available. For more help, just give us a bell! Key: Questions and Answers What is non mechanical plant? Plant such as such excavators, dumpers, saws and generators are by their nature, mechanically…

6m x 3m x 25mm Anti Skid Road Plate – Steel C/W Bevelled Edge and SALLY

Typical applications: For use on streets and highways, but more suitable for larger industrial/airport/dockside environments. Bevelled/chamfered edges on all four sides to avoid them being a trip hazard To traverse excavations up to 1,700 mm wide, where pedestrian and/or cars will cross To cover trench up to 1,400 mm wide for trucks, heavy construction plant, cranes and forklifts Can be used for covering hardened or unmade ground such as…

2.5m x 1.25m x 20mm (8ft x 4ft x 3/4 inch) – Steel Crossing/Pit Cover Plate

Typical applications To cover trench up to 800 mm wide for highway traffic loadings and similar masses To bridge trench or void up to 400 mm wide for lorries, medium construction plant and medium forklifts Ideal for skating and/or rolling heavier loads across terrain that is hard but not flat and smooth. Suitable for traversing with steel tracked machinery Also used for covering hardened areas (block pave, tarmac and non reinforced concrete)…

Acrow Props (Big foot)

Acrow props are commonly used in the construction industry by builders and scaffolders to form load bearings under compression. Their tubular steel construction with a square edged thread and variable position pin locking system that means that can be used at variable lengths within their working stroke. Size Closed (Metric) Open (Metric) Closed (Imperial) 0 1.04 m. 1.83 m 3 ft 5 in 1 1.75 m 3.12 m 5 ft 9 in 2 1.90 m 3.35 m 6 ft 7 in 3 2.59 m…

Alloy Road Plate 3.0 X 1.5 X 40mm

After numerous requests from the petrochem industry we now offer a limited number aluminium alloy sheets Suitable for environments where spark arrestors and sources of ignition that might be caused ferrous/iron alloys and being in contact with stone/flint elements in concrete that can occur with standard steel plating, Ideal solution for load bearing across voids and excavations. Protecting new areas of concrete whilst it cures, shielding…

7.5m x 3m x 25mm Anti Skid Road Plate – Steel C/W Bevelled Edge and SALLY

Typical applications: Can be used on streets and highways in zones with minimal camber, but more suitable for continuously flat zones usually found larger industrial/airport/dockside environments. Bevelled/chamfered edges on all four sides to avoid them being a trip hazard making To traverse excavations up to 1,700 mm wide, where pedestrian and/or cars will cross To cover trench up to 1,400 mm wide for trucks, heavy construction plant, cranes…

Page 1 of 512345