Airside Safelift Anti-Skid (BAA) Road/Crossing Plates
We are the originators and pre-eminent manufacturers worldwide combining all of the following technologies to create the unique Airside-Safelift range.
Regularly in use in U.K airports such as London Gatwick (LGW), London Heathrow (LHR), London Stanstead (STN), Southampton Airport (SOU), Bournemouth Airport (BOH), Glasgow International Airport (GLA), Manchester Airport (MAN), London Southend Airport (SEN) & London City Airport (LCY)
Anti skid & coating feature:
- We have developed an existing technique known to be the cutting edge of anti skid technology & used on offshore rigs & aircraft carriers
- Our version exceeds any highway specification worldwide having a scrim ratio 70 and still 68 after 1 million footfalls (50 being recommended figure for highway use). It is therefore as effective as a road surface as dry asphalt. (as tested by Transport Research Laboratories for Transport For London(TFL))
- It is superior to standard resin encapsulated aggregate coatings.
- The alloy it is coated with is part Titanium Carbide, one of the toughest materials known to man & its resistance to wear is fantastic.
- Unlike other coatings, the nature of the surfacing means it will not come off in flakes or chips that would present a hazard to both personnel or equipment if it were subjected to jet blast or explosion.
- Sealed with 2k epoxy or similar to prevent glare.
- An integral part of BAA’s specification for airport works
- The aeroplane logo denotes this as 'fit for Air-side use on airports'
The plate & security:
- Processed to the highest engineering standards at our own works.
- Edges bevelled to allow smooth passage of equipment or pedestrians across them
- At least 4 precisely positioned counter bored holes in each corner mean that they can be secured down tightly with ANKER BOLTS (or similar) for security & safety
The lifters:
- S.A.L.L.Y (Swivel Acting Lock & Lift Yolks)
- We are the sole UK importer of the CE marked & patented SALLY SAFELIFT system.
- By far the quickest, simplest and safest way of lifting roadplates available in the world today.
- Safe Working Load of 4 tonnes per unit
- Individually serial numbered for tracking purposes.
- Approved for use both in London Transport & as a BAA safe system of work.
AIRSIDE SAFELIFT plate only from roadplatehire... The ultimate plate for airside works.
3m x 1.5m x 25mm Airside Road/Crossing Plates – Steel C/W Bevelled Edge and SALLY
Typical applications: Aeroplane logo denotes ‘fit for airside works’ Unique serial number clearly marked for traceability Can be used on streets and highways Primarily used where top grade anti-skid with non friable,anti glare coating is required Bevelled/chamfered edges on all four sides to avoid them being a trip hazard To cross excavations up to 1,600…
2.0m x 2.0m x 25mm Airside Road/Pit Cover Plate – Steel C/W Bevelled Edge and SALLY
Typical applications: Aeroplane logo denotes ‘fit for airside works’ Unique serial number clearly marked for traceability Can be used on streets and highways Primarily used where top grade anti-skid with non friable,anti glare coating is required Bevelled/chamfered edges on all four sides to avoid them being a trip hazard To traverse excavations up to 1700…
4m x 2m x 25mm Airside Road/Crossing Plates – Steel C/W Bevelled Edge and SALLY
Typical applications: Sometimes referred to as ‘Mega-plate’ Aeroplane logo denotes ‘fit for airside works’ Unique serial number clearly marked for traceability Can be used on streets and highways Primarily used where top grade anti-skid with non friable, anti glare coating is required Bevelled/chamfered edges on all four sides to avoid them being a trip hazard…
6m x 3m x 25mm Airside Road/Pit Cover Plate – Steel C/W Bevelled Edge and SALLY
Typical applications: Aeroplane logo denotes ‘fit for airside works’ Unique serial number clearly marked for traceability Can be used on streets and highways in zones with minimal camber, but more suitable for continuously flat zones often larger industrial/airport/dockside and airport environments. Primarily used where top grade anti-skid with non friable,anti glare coating is required Bevelled/chamfered…
7.5m x 3m x 25mm Airside Road/Pit Cover Plate – Steel C/W Bevelled Edge and SALLY Airside
Typical applications: Aeroplane logo denotes ‘fit for airside works’ Unique serial number clearly marked for traceability Can be used on streets and highways Primarily used where top grade anti-skid with non friable,anti glare coating is required Bevelled/chamfered edges on all four sides to avoid them being a trip hazard To traverse excavations up to 1700…