Super Heavy Duty Range

Super heavy duty road plates

Modular off site construction methods, plus larger and more ambitious infrastructure projects mean that there are some truly epic loads are on the move.

Transformers, reactors, bridge structures, railway engineering projects, distillation plant, high energy physics pieces, wind turbines, gas turbine generation plant and Very Large Portside Cranes have all been moved using our expert services. Our team of specialists have available at their fingertips a superb range of super heavy duty plates, and, just as importantly, a rapid method of getting them to your jobsite anywhere in the country on our own transport fleet.

And even if the plate you require doesn't yet exist, roadplatehire.co.uk will make it for you. We regularly work with sections from 40 mm to 150 mm.

2.4m x 2.1m x 40mm C/W Sally Lifter (Bridging Plates)

Typical applications: Massive base for temporary structures Bridging very heavy load combinations across sensitive areas Used as pads to bear heavy crane/piling rig/concrete pump jack loads To make safe open excavations such as inspection chambers, bell pits or utilities junctions Load bearing capacities of many hundreds of tonnes subject to application. Suitable for passing over…

Read more…

Heavy duty – SERIES 38 – Steel C/W Bevelled Edge and SALLY

Typical applications: In 38 mm thickness of S355 equivalent steel, this is the heaviest and highest performing crossing plate ranges available. Can be deployed on streets and highways in extremis, but more suitable for larger industrial/airport/dockside environments. Bevelled/chamfered edges on 2 sides, and square edged on the other so that the remaining edges can give…

Read more…

FE45 – 3.6 x 3.0 x 45 mm Steel Crossing/Pit Cover Plate C/W SALLY

Typical applications: Massive base for temporary structures Bridging very heavy load combinations across sensitive areas Chamfered edges and ANKER bolt counter-bores Specified to carry 44 t GVW across 2.50m x 2.50m square and unsupported voids To make safe open excavations such as inspection chambers, bell pits or utilities junctions Suitable for crossing with tracked vehicles,…

Read more…

6m x 3m x 25mm Anti Skid Road Plate – Steel C/W Bevelled Edge and SALLY

Typical applications: For use on streets and highways, but more suitable for larger industrial/airport/dockside environments. Bevelled/chamfered edges on all four sides to avoid them being a trip hazard To traverse excavations up to 1,700 mm wide, where pedestrian and/or cars will cross To cover trench up to 1,400 mm wide for trucks, heavy construction plant,…

Read more…

7.5m x 3m x 25mm Anti Skid Crossing/Pit Cover Plates – Steel C/W Bevelled Edge and SALLY

Typical applications: For use on streets and highways, but more suitable for larger industrial/airport/dockside environments. Bevelled/chamfered edges on all four sides to avoid them being a trip hazard To traverse excavations up to 1,700 mm wide, where pedestrian and/or cars will cross To cover trench up to 1,400 mm wide for trucks, heavy construction plant,…

Read more…

SERIES 70 – 70 mm thickness Bridging Plates – Varying dimensions

Typical applications: Suitable for larger industrial/airport/dockside environments. To traverse excavations up to 2,400 mm wide for trucks, heavy construction plant, Self Propelled Modular Transports (SPMT’s), large cranes and forklifts (150 tonnes plus) Can be used kentledge/ballast weights. Base for temporary structures or outrigger mitigation for any likely loadings To make safe larger open excavations such…

Read more…