Bare Steel - Smooth Top - Skate Plate

Bare Steel - Smooth Top - Skate Plate

Skating, rolling and moving large and very heavy loads is always a challenge. Poor and worn finish on concrete floors, unmade ground, inclines, cambers and unquantified subterranean conditions can make it even more so.

Invariably ducts, drains, fibre optics and culverts lay criss cross under most factories, docks, hospitals and manufacturing plants. Damaging them is not an option.

That's why we provide 'smooth topped/skating plates' in a cross section of sizes and thicknesses. Suitable for machinery skates, caterpillar skates, plant rollers and air skates.

Ground Mat Minis (1.0m x 1.5m x 20 HDPE)

Typical applications: Chemical resistant, anti-slip and no rusting or rotting Lightweight, compact and easy to handle in confined spaces. These are the smaller brother of the standard 3.0 x 1.0 m panels. Their size makes them ideal for pallet-line/over night carriage thus significantly reducing deployment costs for smaller jobs. Made from recycled polypropylene polymer material…

Read more…

Ground Mat Minis (3.0m X 1.0m x 20 HDPE)

Typical applications: Chemical resistant, anti-slip and no rusting or rotting Relatively lightweight and easy to handle in confined spaces. Made from recycled polypropylene polymer material and is therefore ultimately recyclable again. Having a smooth side makes it excellent laying across areas that are grilled or textured and walkways or mezzanines to allow smooth transfer of…

Read more…

Polyroads

Typical applications: Chemical resistant, anti-slip and no rusting or rotting Made from recycled polypropylene polymer material and is therefore ultimately recyclable again. Superb for spreading weight on floors not designed for heavy loadings such as walkways and ramps found in and around piers, promenades, decking, shopping centres and retail malls. Having a machine routed pattern…

Read more…

1.25m x 1.25m x 6mm (4ft x 4ft x 1/4 inch) – Steel

Typical applications: Having a smooth side makes it excellent for lining over decking that’s grilled or textured and walkways or mezzanines to allow smooth transfer of heavy equipment such as boiler room plant and electrical switchgear on rollers or skates across areas that would otherwise be corrugated. Will bridge voids up to 250 mm wide,…

Read more…

2.5m x 1.25m x 12mm (8ft x 4ft x 1/2 inch) – Steel

Will bridge a trench or void up to 400 mm wide for highway traffic loadings and similar masses Ideal for skating/rolling heavier loads across terrain that is hard but not smooth. Suitable for traversing with lighter steel tracked machinery As with all roadplates/crossing plates, the loadings for whatever passes over them will be transferred to…

Read more…

2.5m x 1.25m x 20mm (8ft x 4ft x 3/4 inch) – Steel Crossing/Pit Cover Plate

Typical applications To cover trench up to 800 mm wide for highway traffic loadings and similar masses To bridge trench or void up to 400 mm wide for lorries, medium construction plant and medium forklifts Ideal for skating and/or rolling heavier loads across terrain that is hard but not flat and smooth. Suitable for traversing…

Read more…

2.5m x 1.25m x 25mm (8ft x 4ft x 1 inch) – Steel Crossing/Pit Cover Plate

Typical applications Bridge voids or excavations up to 1200 mm wide for highway traffic and similar masses Ideal to protect collapsed drain covers etc To cover trench up to 750 mm wide for trucks, heavier construction plant, cranes and forklifts Good for skating/rolling heavier loads across unmade terrain. Suitable for use with steel tracked machinery…

Read more…

3m x 1.5m x 25mm – Steel Crossing/Pit Cover Plate and SALLY

Typical applications Available as bevelled OR square edges, dependant on your requirements. To bridge excavations up to 1,600 mm wide for highway traffic and similar masses Ideal for covering continuous runs in roads where lifting and laying precisely and quickly is required. Eg Overnight works that require clearing during day To cover trench up to…

Read more…

4m x 2m x 25mm – Steel Crossing/Pit Cover Plate C/W SALLY

Typical applications: To traverse excavations up to 1700 mm wide for medium weight traffic and similar masses Ideal for doing extended runs in roads where lifting and laying precisely and quickly is required. Eg Timed or overnight works To cover trench up to 1,200 mm wide for trucks, heavy construction plant, cranes and forklifts Good…

Read more…

6m x 3m x 25mm – Steel Crossing/Pit Cover Plate C/W SALLY

Typical applications To traverse excavations up to 1700 mm wide for light/medium traffic and similar masses To cover trench up to 1,400 mm wide for trucks, heavy construction plant, cranes and forklifts Good for skating and rolling heavier loads across problematic terrain Suitable for traversing with steel tracked machinery Of an adequate thickness to form…

Read more…

Page 1 of 212