4m x 2m x 25mm – Steel Crossing/Pit Cover Plate C/W SALLY

4m x 2m x 25mm – Steel Crossing/Pit Cover Plate C/W SALLY

Typical applications:

  • Sometimes referred to as ‘Mega-plate’
  • To traverse excavations up to 1700 mm wide for medium weight traffic and similar masses
  • Ideal for doing extended runs in roads where lifting and laying precisely and quickly is required. Eg Timed or overnight works
  • To cover trench up to 1,200 mm wide for trucks, heavy construction plant, cranes and forklifts
  • Good for skates or rollers with heavier loads across unmade surfaces
  • Suitable for traversing with steel tracked machinery
  • Of an adequate thickness to form outrigger/stabiliser pads for plant.
  • Also used for covering areas (block pave, tarmac and non reinforced concrete) for heavier traffic such as trucks, cranes and machinery
  • Square edge versions available subject to stock.
  • As with all roadplates/crossing plates, the loadings for whatever passes over them will be transferred to the areas bearing the edges of the plate. Adequate measures to shore the underlying substrate should be taken
  • Individually serial numbered for tracking purposes.

Mass: 1,570 kgs

Mechanical handling: Yes. Suitable forklift or overhead lifting arrangement

SALLY Version: Yes,

Anti skid: N/A – Natural finish

Securing method: *Available with counterbored holes for M18 ANKERBOLTS or similar

Specification sheet

Case study: Toyoda Gosei Ltd – Swansea – South Wales