Street Works and Highway Grade Anti-Skid Roadplates

Street Works and Highway Grade Anti-Skid

Health and Safety considerations mean that road plates that are to be used in public areas or in areas where personnel are working on foot, must have a skid or slip resistant feature.

Street and highway applications have to conform to regulations and specifications requiring that adequate thickness and abrasion/friction ratings (scrim ratio). For free guidance go to the Questions & Answers section.

Our huge fleet of 'Streetworks' plates have all been shot blasted, prepared and surface treated with our own blended resin bond system that incorporates a high grip and wear resistant aggregate such as bauxite, blast furnace slag or flint-ag. All within an encapsulation that has a far superior resistance to becoming un-adhered after continuous load cycles giving our units better performance and longer life-spans than the offerings by competitors.

1.25m x 1.25m x 6mm (4ft x 4ft x 1/4 inch) Checker – Steel Road Plate

Typical applications: Footpaths, pavements & private driveways Assuming stable ground conditions, to cover trench up to 250 mm wide, where pedestrian and/or cars will cross Not suitable for use on the public highway except at very low speeds Can be traversed with tracked vehicles, as the anti-slip function is part of the steel fabric of…

Read more…

2.5m x 1.25m x 12mm (8ft x 4ft x 1/2 inch) Anti Skid – Steel Road Plate

For use on streets and highways Assuming stable ground conditions and when positioned with the long side of the plate bridging the void, to cover trench up to 400 mm wide for highway traffic The most widely used roadplate with utilities operations Not suitable for traversing with steel tracked vehicles, as the tracks will cause…

Read more…

2.5m x 1.25m x 20mm (8ft x 4ft x 3/4 inch) Anti Skid – Steel Road Plate

Typical applications For use on streets and highways and the recommended standard thickness for construction sites. Assuming stable ground conditions and when positioned with the long side of the plate bridging the void, to  traverse excavations up to 800 mm wide for highway traffic Assuming stable ground conditions and when positioned with the long side…

Read more…

2.5m x 1.25m x 25mm (8ft x 4ft x 1 inch) Anti Skid – Steel Road Plate

Typical applications: For use on streets and highways. To traverse excavations up to 1200 mm wide for highway traffic Ideal to support collapsed manhole covers etc To cover trench up to 750 mm wide for trucks, heavy construction plant, cranes and forklifts Not suitable for traversing with steel tracked vehicles, as their tracks will cause…

Read more…

2.0m x 2.0m x 25mm Anti-skid Road Plate– Steel C/W Bevelled Edge and SALLY

Typical applications: Unique serial number clearly marked for traceability Can be used on streets and highways Bevelled/chamfered edges on all four sides to avoid them being a trip hazard To traverse excavations up to 1700 mm wide, where pedestrian and/or cars will cross To cover trench up to 1200 mm wide for trucks, heavy construction…

Read more…

3m x 1.5m x 25mm Anti Skid Road Plate – Steel C/W Bevelled Edge and SALLY

Typical applications: For use on streets and highways Bevelled/chamfered edges on all four sides to avoid them being a trip hazard To traverse excavations up to 1,600 mm wide for highway traffic Ideal for doing extended runs in roads where lifting and laying precisely and quickly is required. Eg Overnight works To cover trench up…

Read more…

4m x 2m x 25mm Anti Skid Road Plate – Steel C/W Bevelled Edge and SALLY

Typical applications: For use on streets and highways Bevelled/chamfered edges on all four sides to avoid them being a trip hazard To traverse excavations up to 1700 mm wide, where pedestrian and/or cars will cross To cover trench up to 1200 mm wide for trucks, heavy construction plant, cranes and forklifts Also used for covering…

Read more…

6m x 3m x 25mm Anti Skid Road Plate – Steel C/W Bevelled Edge and SALLY

Typical applications: Can be used on streets and highways in zones with minimal camber, but more suitable for continuously flat zones often larger industrial/airport/dockside environments. Bevelled/chamfered edges on all four sides to avoid them being a trip hazard To traverse excavations up to 1,700 mm wide, where pedestrian and/or cars will cross To cover trench…

Read more…

7.5m x 3m x 25mm Anti Skid Road Plate – Steel C/W Bevelled Edge and SALLY

Typical applications: Can be used on streets and highways in zones with minimal camber, but more suitable for continuously flat zones usually found larger industrial/airport/dockside environments. Bevelled/chamfered edges on all four sides to avoid them being a trip hazard making To traverse excavations up to 1,700 mm wide, where pedestrian and/or cars will cross To…

Read more…

Heavy duty – SERIES 38 – Steel C/W Bevelled Edge Road Plates and SALLY

Typical applications: In 38 mm thickness of S355 equivalent steel, this is one of the thickest and highest performing crossing plate ranges available. Can be deployed on streets and highways, but more suitable for larger industrial/airport/dockside environments. Bevelled/chamfered edges on 2 sides, and square edged on the other so that the remaining edges can give…

Read more…