7.5m x 3m x 25mm Anti Skid Road Plate – Steel C/W Bevelled Edge and SALLY
Typical applications:
- Can be used on streets and highways in zones with minimal camber, but more suitable for continuously flat zones usually found larger industrial/airport/dockside environments.
- Bevelled/chamfered edges on all four sides to avoid them being a trip hazard making
- To traverse excavations up to 1,700 mm wide, where pedestrian and/or cars will cross
- To cover trench up to 1,400 mm wide for trucks, heavy construction plant, cranes and forklifts
- Also used for covering hardened or unmade ground such as playing fields and lawns areas for heavier traffic such as trucks, cranes and machinery
- Solid base for temporary structures
- To make safe larger open excavations such as inspection pits, bell chambers or utilities service junctions
- Can be bolted down with ANKERBOLTS to improve security and load performance
- Not suitable for traversing with steel tracked vehicles, as their tracks will cause damage to the anti-skid surface if applied directly. (See our bare steel range).
- As with all roadplates/crossing plates, the loadings for whatever passes over them will be transferred to the areas bearing the edges of the plate. Adequate measures to shore the underlying excavations should be taken
- Individually serial numbered for tracking purposes.
Mass: 4,415 kgs
Mechanical handling: Yes. Using suitable crane etc via 2 x SALLY lifting points plus suitable spreader beam.
SALLY Only: Yes – 2 X
Anti skid: Resin encapsulated aggregate.
Securing method: Precision drilled and counterbored 20 mm dia holes in corners for M18 ANKERBOLTS or similar.
Case study: Sediment Tanks – Waste Water Treatment Works – Kent