3m x 1.5m x 25mm Anti Skid Road Plate – Steel C/W Bevelled Edge and SALLY
Typical applications:
- For use on streets and highways
- Bevelled/chamfered edges on all four sides to avoid them being a trip hazard
- To traverse excavations up to 1,600 mm wide for highway traffic
- Ideal for doing extended runs in roads where lifting and laying precisely and quickly is required. Eg Overnight works
- To cover trench up to 1,000 mm wide for trucks, heavy construction plant, cranes and forklifts
- Also used for covering hardened or unmade ground such as playing fields and lawns areas for heavier traffic such as trucks, cranes and machinery
- Temporary roadways for construction or high volumes of traffic (eg event car parks)
- Replacement or repair of damaged sections on truck parks, goods yards, hammer heads, turning areas or warehouses.
- Can be bolted down with ANKERBOLTS to improve security and load performance
- Not suitable for traversing with steel tracked vehicles, as their tracks will cause damage to the anti-skid surface if applied directly. (See our bare steel range).
- As with all roadplates/crossing plates, the loadings for whatever passes over them will be transferred to the areas bearing the edges of the plate. Adequate measures to shore the underlying excavations should be taken
- Individually serial numbered for tracking purposes.
Mass: 883 kgs
Mechanical handling: Yes. Using suitable crane etc via SALLY centrally mounted lifting point.
SALLY Only: Yes
Anti skid: Resin encapsulated aggregate.
Securing method: Precision drilled and counterbored 20 mm dia holes in corners for M18 ANKERBOLTS or similar
Case study: BNP Paribas/NHS Shrewsbury and Telford – Shrewsbury Hospital