4m x 2m x 25mm Anti Skid Road Plate – Steel C/W Bevelled Edge and SALLY

Typical applications:

Sometimes referred to as ‘Mega-plate’
For use on streets and highways
Bevelled/chamfered edges on all four sides to avoid them being a trip hazard
To traverse excavations up to 1700 mm wide, where pedestrian and/or cars will cross
To cover trench up to 1200 mm wide for trucks, heavy construction plant, cranes and forklifts
Also used for covering hardened or unmade ground such as playing fields and lawns areas for heavier traffic such as trucks, cranes and machinery
Temporary roadways for construction or high volumes of traffic (eg event car parks)
To make safe larger open excavations such as inspection pits, bell chambers or utilities service junctions
Can be bolted down with ANKERBOLTS to improve security and load performance
Not suitable for traversing with steel tracked vehicles, as their tracks will cause damage to the anti-skid surface if applied directly. (See our bare steel range).
As with all roadplates/crossing plates, the loadings for whatever passes over them will be transferred to the areas bearing the edges of the plate. Adequate measures to shore the underlying excavations should be taken
Individually serial numbered for tracking purposes.

Mass: 1,570 kgs

Mechanical handling: Yes. Using suitable crane etc via SALLY centrally mounted lifting point.

SALLY Only: Yes

Anti skid: Resin encapsulated aggregate.

Securing method: Precision drilled and counterbored 20 mm dia holes in corners for M18 ANKERBOLTS or similar.

road plate hire