2.5m x 1.25m x 12mm (8ft x 4ft x 1/2 inch) Anti Skid – Steel Road Plate

For use on streets and highways
Assuming stable ground conditions and when positioned with the long side of the plate bridging the void, to cover trench up to 400 mm wide for highway traffic
The most widely used roadplate with utilities operations
Not suitable for traversing with steel tracked vehicles, as the tracks will cause damage to the anti-skid surface if applied directly. (See our bare steel range).
As with all roadplates/crossing plates, the loadings for whatever passes over them will be transferred to the areas bearing the edges of the plate. Adequate measures to shore the underlying excavations should be taken

Mass: 300 kgs

Mechanical handling: Yes. Suitable forklift or overhead lifting arrangement

Anti skid: Resin encapsulated aggregate

SALLY Version: Currently only on request (see our 20 mm that have them as standard)

Securing method: Nominally drilled 11 mm dia holes in corners for Plate pins, ANKER screws or similar.

road plate hire